Browse Arkansas Code titles and sections
49 U.S.C. § 30127 — Automatic occupant crash protection and seat belt use
Federal law — U.S. Code and appendices · legal_authorities
**(a) Definitions.—** In this section—
(1) “bus” means a motor vehicle with motive power (except a trailer) designed to carry more than 10 individuals.
(2) “multipurpose passenger vehicle” means a motor vehicle with motive power (except a trailer), designed to carry not more than 10 individuals, that is constructed either on a truck chassis or with special features for occasional off-road operation.
(3) “passenger car” means a motor vehicle with motive power (except a multipurpose passenger vehicle, motorcycle, or trailer) designed to carry not more than 10 individuals.
(4) “truck” means a motor vehicle with motive power (except a trailer) designed primarily to transport property or special purpose equipment.
**(b) Inflatable Restraint Requirements.—**
(1) Not later than September 1, 1993, the Secretary of Transportation shall prescribe under this chapter an amendment to Federal Motor Vehicle Safety Standard 208 issued under the National Traffic and Motor Vehicle Safety Act of 1966. The amendment shall require that the automatic occupant crash protection system for both of the front outboard seating positions for each of the following vehicles be an inflatable restraint (with lap and shoulder belts) complying with the occupant protection requirements under section 4.1.2.1 of Standard 208:
(A) 95 percent of each manufacturer’s annual production of passenger cars manufactured after August 31, 1996, and before September 1, 1997.
(B) 80 percent of each manufacturer’s annual production of buses, multipurpose passenger vehicles, and trucks (except walk-in van-type trucks and vehicles designed to be sold only to the United States Postal Service) with a gross vehicle weight rating of not more than 8,500 pounds and an unloaded vehicle weight of not more than 5,500 po
Source: Supplied U.S. Code snapshot — release unconfirmed · 49 U.S.C. § 30127
Stored review status: release_metadata_unconfirmed. A text match is a research starting point; applicability is not established.
Original supplied file — preserved unchanged
Download original Markdown file
File SHA-256: 039868ae801a2a6f3c6fa63932ad7761cb67fec375554ad59579250251bbfb9a. The original may include catalog metadata, neighboring provisions, or embedded records outside this collection's scope. Search shows only the selected federal record. Historical editions and unverified snapshots are not a statement of current law.
Authority boundary: historical or unconfirmed source not current law verified.
Open the recorded source website ↗
Record provenance
Stable record: federal_law:legal_authorities:record_usc_49ae248fe4f72d0056b602be
Source file: Laws/federal/codes/united-states-code/title-49/section-30127-automatic-occupant-crash-protection-and-seat-belt-use--eaa0f384c4.md
Pages: Not recorded – Not recorded
Passage SHA-256: ed5c625d4e57774aaaac0571d318bf6f3c9895ad45837a0ca460181b34ae646f
Source location: Title 49, Chapter 301, § 30127; chapter-301-motor-vehicle-safety.md
Stored source content
**(a) Definitions.—** In this section—
(1) “bus” means a motor vehicle with motive power (except a trailer) designed to carry more than 10 individuals.
(2) “multipurpose passenger vehicle” means a motor vehicle with motive power (except a trailer), designed to carry not more than 10 individuals, that is constructed either on a truck chassis or with special features for occasional off-road operation.
(3) “passenger car” means a motor vehicle with motive power (except a multipurpose passenger vehicle, motorcycle, or trailer) designed to carry not more than 10 individuals.
(4) “truck” means a motor vehicle with motive power (except a trailer) designed primarily to transport property or special purpose equipment.
**(b) Inflatable Restraint Requirements.—**
(1) Not later than September 1, 1993, the Secretary of Transportation shall prescribe under this chapter an amendment to Federal Motor Vehicle Safety Standard 208 issued under the National Traffic and Motor Vehicle Safety Act of 1966. The amendment shall require that the automatic occupant crash protection system for both of the front outboard seating positions for each of the following vehicles be an inflatable restraint (with lap and shoulder belts) complying with the occupant protection requirements under section 4.1.2.1 of Standard 208:
(A) 95 percent of each manufacturer’s annual production of passenger cars manufactured after August 31, 1996, and before September 1, 1997.
(B) 80 percent of each manufacturer’s annual production of buses, multipurpose passenger vehicles, and trucks (except walk-in van-type trucks and vehicles designed to be sold only to the United States Postal Service) with a gross vehicle weight rating of not more than 8,500 pounds and an unloaded vehicle weight of not more than 5,500 pounds manufactured after August 31, 1997, and before September 1, 1998.
(C) 100 percent of each manufacturer’s annual production of passenger cars manufactured after August 31, 1997.
(D) 100 percent of each manufacturer’s annual production of vehicles described in clause (B) of this paragraph manufactured after August 31, 1998.
(2) Manufacturers may not use credits and incentives available before September 1, 1998, under the provisions of Standard 208 (as amended by this section) to comply with the requirements of paragraph (1)(D) of this subsection after August 31, 1998.
**(c) Owner Manual Requirements.—** In amending Standard 208, the Secretary of Transportation shall require, to be effective as soon as possible after the amendment is prescribed, that owner manuals for passenger cars, buses, multipurpose passenger vehicles, and trucks equipped with an inflatable restraint include a statement in an easily understandable format stating that—
(1) either or both of the front outboard seating positions of the vehicle are equipped with an inflatable restraint referred to as an “airbag” and a lap and shoulder belt;
(2) the “airbag” is a supplemental restraint and is not a substitute for lap and shoulder belts;
(3) lap and shoulder belts also must be used correctly by an occupant in a front outboard seating position to provide restraint or protection from frontal crashes as well as other types of crashes or accidents; and
(4) occupants should always wear their lap and shoulder belts, if available, or other safety belts, whether or not there is an inflatable restraint.
**(d) Seat Belt Use Laws.—** Congress finds that it is in the public interest for each State to adopt and enforce mandatory seat belt use laws and for the United States Government to adopt and enforce mandatory seat belt use regulations.
**(e) Temporary Exemptions.—**
(1) On application of a manufacturer, the Secretary of Transportation may exempt, on a temporary basis, motor vehicles of that manufacturer from any requirement under subsections (b) and (c) of this section on terms the Secretary considers appropriate. An exemption may be renewed.
(2) The Secretary of Transportation may grant an exemption under paragraph (1) of this subsection if the Secretary finds that there has been a disruption in the supply of any component of an inflatable restraint or in the use and installation of that component by the manufacturer because of an unavoidable event not under the control of the manufacturer that will prevent the manufacturer from meeting its anticipated production volume of vehicles with those restraints.
(3) Only an affected manufacturer may apply for an exemption. The Secretary of Transportation shall prescribe in the amendment to Standard 208 required under this section the information an affected manufacturer must include in its application under this subsection. The manufacturer shall specify in the application the models, lines, and types of vehicles affected. The Secretary may consolidate similar applications from different manufacturers.
(4) An exemption or renewal of an exemption is conditioned on the commitment of the manufacturer to recall the exempted vehicles for installation of the omitted inflatable restraints within a reasonable time that the manufacturer proposes and the Secretary of Transportation approves after the components become available in sufficient quantities to satisfy both anticipated production and recall volume requirements.
(5) The Secretary of Transportation shall publish in the Federal Register a notice of each application under this subsection and each decision to grant or deny a temporary exemption and the reasons for the decision.
(6) The Secretary of Transportation shall require a label for each exempted vehicle that can be removed only after recall and installation of the required inflatable restraint. The Secretary shall require that written notice of the exemption be provided to the dealer and the first purchaser of each exempted vehicle other than for resale, with the notice being provided in a way, and containing the information, the Secretary considers appropriate.
**(f) Application.—**
(1) This section revises, but does not replace, Standard 208 as in effect on December 18, 1991, including the amendment of March 26, 1991 (56 Fed. Reg. 12472), to Standard 208, extending the requirements for automatic crash protection, with incentives for more innovative automatic crash protection, to trucks, buses, and multipurpose passenger vehicles. This section may not be construed as—
(A) affecting another provision of law carried out by the Secretary of Transportation applicable to passenger cars, buses, multipurpose passenger vehicles, or trucks; or
(B) establishing a precedent related to developing or prescribing a Government motor vehicle safety standard.
(2) This section and amendments to Standard 208 made under this section may not be construed as indicating an intention by Congress to affect any liability of a motor vehicle manufacturer under applicable law related to vehicles with or without inflatable restraints.
**(g) Report.—**
(1) On October 1, 1992, and annually after that date through October 1, 2000, the Secretary of Transportation shall submit reports on the effectiveness of occupant restraint systems expressed as a percentage reduction in fatalities or injuries of restrained occupants compared to unrestrained occupants for—
(A) a combination of inflated restraints and lap and shoulder belts;
(B) inflated restraints only; and
(C) lap and shoulder belts only.
(2) In consultation with the Secretaries of Labor and Defense, the Secretary of Transportation also shall provide information and analysis on lap and shoulder belt use, nationally and in each State by—
(A) military personnel;
(B) Government, State, and local law enforcement officers;
(C) other Government and State employees; and
(D) the public.
**(h) Airbags for Government Cars.—** In cooperation with the Administrator of General Services and the heads of appropriate departments, agencies, and instrumentalities of the Government, the Secretary of Transportation shall establish a program, consistent with applicable procurement laws of the Government and available appropriations, requiring that all passenger cars acquired—
(1) after September 30, 1994, for use by the Government be equipped, to the maximum extent practicable, with driver-side inflatable restraints; and
(2) after September 30, 1996, for use by the Government be equipped, to the maximum extent practicable, with inflatable restraints for both front outboard seating positions.
Cross-references
Connections may be documented source relationships, shared citations or nearby passages. Each explains its basis; a connection alone does not establish applicability to your situation.
Federal law — U.S. Code and appendices · legal_authorities
**(a) General Requirements.—** The Secretary of Transportation shall prescribe motor vehicle safety standards. Each standard shall be practicable, meet the need for motor vehicle safety, and be stated in objective terms.
**(b) Considerations and Consultation.—** When prescribing a motor vehicle safety standard under this chapter, the Secretary shall—
(1) consider relevant available motor vehicle safety information;
(2) consult with the agency established under the Act of August 20, 1958 (Public Law 85–684, 72 Stat. 635), and other appropriate State or interstate authorities (including legislative committees);
(3) consider whether a proposed standard is reasonable, practicable, and appropriate for the particular type of motor vehicle or motor vehicle equipment for which it is prescribed; and
(4) consider the extent to which the standard will carry out [section 30101 of this title](https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title49-section30101&num=0&edition=prelim).
**(c) Cooperation.—** The Secretary may advise, assist, and cooperate with departments, agencies, and instrumentalities of the United States Government, States, and other public and private agencies in developing motor vehicle safety standards.
**(d) Effective Dates of Standards.—** The Secretary shall specify the effective date of a motor vehicle safety standard prescribed under this chapter in the order prescribing the standard. A standard may not become effective before the 180th day after the standard is prescribed or later than one year after it is prescribed. However, the Secretary may prescribe a different effective date after finding, for good cause shown, that a different effective date is in the public interest and publishing the reasons for the finding.
**(e) 5-Year Plan f
Source: Supplied U.S. Code snapshot — release unconfirmed · 49 U.S.C. § 30111
Stored review status: release_metadata_unconfirmed. Explicit cross-reference supplied in source Markdown; currentness and applicability require review.
Federal law — U.S. Code and appendices · legal_authorities
**(a) In General.—** A manufacturer or distributor of a motor vehicle or motor vehicle equipment shall certify to the distributor or dealer at delivery that the vehicle or equipment complies with applicable motor vehicle safety standards prescribed under this chapter. A person may not issue the certificate if, in exercising reasonable care, the person has reason to know the certificate is false or misleading in a material respect. Certification of a vehicle must be shown by a label or tag permanently fixed to the vehicle. Certification of equipment may be shown by a label or tag on the equipment or on the outside of the container in which the equipment is delivered.
**(b) Certification Label.—** In the case of the certification label affixed by an intermediate or final stage manufacturer of a motor vehicle built in more than 1 stage, each intermediate or final stage manufacturer shall certify with respect to each applicable Federal motor vehicle safety standard—
(1) that it has complied with the specifications set forth in the compliance documentation provided by the incomplete motor vehicle manufacturer in accordance with regulations prescribed by the Secretary; or
(2) that it has elected to assume responsibility for compliance with that standard.
If the intermediate or final stage manufacturer elects to assume responsibility for compliance with the standard covered by the documentation provided by an incomplete motor vehicle manufacturer, the intermediate or final stage manufacturer shall notify the incomplete motor vehicle manufacturer in writing within a reasonable time of affixing the certification label. A violation of this subsection shall not be subject to a civil penalty under section 30165.
Source: Supplied U.S. Code snapshot — release unconfirmed · 49 U.S.C. § 30115
Stored review status: release_metadata_unconfirmed. Explicit cross-reference supplied in source Markdown; currentness and applicability require review.
Federal law — U.S. Code and appendices · legal_authorities
In this part (except chapter 329 and except as provided in section 33101)—
(1) “bumper standard” means a minimum performance standard that substantially reduces—
(A) the damage to the front or rear end of a passenger motor vehicle from a low-speed collision (including a collision with a fixed barrier) or from towing the vehicle; or
(B) the cost of repairing the damage.
(2) “insurer” means a person in the business of issuing, or reinsuring any part of, a passenger motor vehicle insurance policy.
(3) “interstate commerce” means commerce between a place in a State and—
(A) a place in another State; or
(B) another place in the same State through another State.
(4) “make”, when describing a passenger motor vehicle, means the trade name of the manufacturer of the vehicle.
(5) “manufacturer” means a person—
(A) manufacturing or assembling passenger motor vehicles or passenger motor vehicle equipment; or
(B) importing motor vehicles or motor vehicle equipment for resale.
(6) “model”, when describing a passenger motor vehicle, means a category of passenger motor vehicles based on the size, style, and type of a make of vehicle.
(7) “motor vehicle” means a vehicle driven or drawn by mechanical power and manufactured primarily for use on public streets, roads, and highways, but does not include a vehicle operated only on a rail line.
(8) “motor vehicle accident” means an accident resulting from the maintenance or operation of a passenger motor vehicle or passenger motor vehicle equipment.
(9) “multipurpose passenger vehicle” means a passenger motor vehicle constructed on a truck chassis or with special features for occasional off-road operation.
(10) “passenger motor vehicle” means a motor vehicle with motive power designed to carry not more than 12 indi
Source: Supplied U.S. Code snapshot — release unconfirmed · 49 U.S.C. § 32101
Stored review status: release_metadata_unconfirmed. Explicit cross-reference supplied in source Markdown; currentness and applicability require review.
Federal law — U.S. Code and appendices · legal_authorities
**(a) Definitions.—** In this title, the following definitions apply:
(1) **Apportionment.—** — The term “apportionment” includes unexpended apportionments made under prior authorization laws.
(2) **Asset management.—** — The term “asset management” means a strategic and systematic process of operating, maintaining, and improving physical assets, with a focus on both engineering and economic analysis based upon quality information, to identify a structured sequence of maintenance, preservation, repair, rehabilitation, and replacement actions that will achieve and sustain a desired state of good repair over the lifecycle of the assets at minimum practicable cost.
(3) **Carpool project.—** — The term “carpool project” means any project to encourage the use of carpools and vanpools, including provision of carpooling opportunities to the elderly and individuals with disabilities, systems for locating potential riders and informing them of carpool opportunities, acquiring vehicles for carpool use, designating existing highway lanes as preferential carpool highway lanes, providing related traffic control devices, designating existing facilities for use for preferential parking for carpools, and real-time ridesharing projects, such as projects where drivers, using an electronic transfer of funds, recover costs directly associated with the trip provided through the use of location technology to quantify those direct costs, subject to the condition that the cost recovered does not exceed the cost of the trip provided.
(4) **Construction.—** — The term “construction” means the supervising, inspecting, actual building, and incurrence of all costs incidental to the construction or reconstruction of a highway or any project eligible for assistance under this title, including bon
Source: Supplied U.S. Code snapshot — release unconfirmed · 23 U.S.C. § 101
Stored review status: release_metadata_unconfirmed. Explicit cross-reference supplied in source Markdown; currentness and applicability require review.
Federal law — U.S. Code and appendices · legal_authorities
**(a)** As soon as practicable after the end of each fiscal year, the Secretary of Transportation shall report to the President, for submission to Congress, on the activities of the Department of Transportation during the prior fiscal year.
**(b)** The Secretary shall submit to Congress each year a report on the conditions of the public ports of the United States, including the—
(1) economic and technological development of the ports;
(2) extent to which the ports contribute to the national welfare and security; and
(3) factors that may impede the continued development of the ports.
**(c)**
(1) The Secretary shall submit to Congress in March 1998, and in March of each even-numbered year thereafter, a report of estimates by the Secretary on the current performance and condition of public mass transportation systems with recommendations for necessary administrative or legislative changes.
(2) In reporting to Congress under this subsection, the Secretary shall prepare a complete assessment of public transportation facilities in the United States. The Secretary also shall assess future needs for those facilities and estimate future capital requirements and operation and maintenance requirements for one-year, 5-year, and 10-year periods at specified levels of service.
Source: Supplied U.S. Code snapshot — release unconfirmed · 49 U.S.C. § 308
Stored review status: release_metadata_unconfirmed. Incoming connection: Explicit cross-reference supplied in source Markdown; currentness and applicability require review.
Federal law — U.S. Code and appendices · legal_authorities
Page 783
TITLE 49—TRANSPORTATION
§ 30127
§ 30127. Automatic occupant crash protection
and seat belt use
(a) DEFINITIONS.—In this section—
(1) ‘‘bus’’ means a motor vehicle with motive
power (except a trailer) designed to carry
more than 10 individuals.
(2) ‘‘multipurpose passenger vehicle’’ means
a motor vehicle with motive power (except a
trailer), designed to carry not more than 10 in-
dividuals, that is constructed either on a
truck chassis or with special features for occa-
sional off-road operation.
(3) ‘‘passenger car’’ means a motor vehicle
with motive power (except a multipurpose pas-
senger vehicle, motorcycle, or trailer) de-
signed to carry not more than 10 individuals.
(4) ‘‘truck’’ means a motor vehicle with mo-
tive power (except a trailer) designed pri-
marily to transport property or special pur-
pose equipment.
(b) INFLATABLE RESTRAINT REQUIREMENTS.—(1)
Not later than September 1, 1993, the Secretary
of Transportation shall prescribe under this
chapter an amendment to Federal Motor Vehicle
Safety Standard 208 issued under the National
Traffic and Motor Vehicle Safety Act of 1966.
The amendment shall require that the auto-
matic occupant crash protection system for
both of the front outboard seating positions for
each of the following vehicles be an inflatable
restraint (with lap and shoulder belts) com-
plying with the occupant protection require-
ments under section 4.1.2.1 of Standard 208:
(A) 95 percent of each manufacturer’s annual
production of passenger cars manufactured
after August 31, 1996, and before September 1,
1997.
(B) 80 percent of each manufacturer’s annual
production of buses, multipurpose passenger
vehicles, and trucks (except walk-in van-type
trucks and vehicles designed to be sold only to
the United State
Source: Supplied 2024 U.S. Code historical extraction · 49 U.S.C. § 30127
Stored review status: historical_2024_not_currentness_verified. Same stored citation; legal effect and authority still require review.