Browse Arkansas Code titles and sections
20-27-903. Labeling required.
Arkansas Code — all titles (historical 2020) · legal_authorities
20-27-903. Labeling required.
(a)(1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material.
(2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 — 1972.
(3) The label shall be legible and visible after installation.
(b) Safety glazing labeling shall not be used on other than safety glazing materials.
Source: Arkansas Code — historical release 78 (November 6, 2020) · 20-27-903
Stored review status: Historical 2020-11-06 source release; later amendments not reconciled; machine-extracted, not independently legally reviewed; source heading status: text_in_historical_source. A text match is a research starting point; applicability is not established.
Issuing source page ↗
Authority boundary: historical statutory source snapshot not current law.
Open the recorded source website ↗
Record provenance
Stable record: arkansas_code:legal_authorities:20-27-903
Source file: gov.ar.code.title.20.odt
Pages: Not recorded – Not recorded
Passage SHA-256: ba83a043d5a3fe21f8ac3e908612ccb1249261d1fdaae12663ce1573b386965d
Source location: content.xml paragraph 22773
Stored source content
20-27-903. Labeling required.
(a)(1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material.
(2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 — 1972.
(3) The label shall be legible and visible after installation.
(b) Safety glazing labeling shall not be used on other than safety glazing materials.
Cross-references
Connections may be documented source relationships, shared citations or nearby passages. Each explains its basis; a connection alone does not establish applicability to your situation.
No explicit source connection was found. This does not mean there are no relevant authorities.