Browse Arkansas Code titles and sections
20-23-303. Hydrostatic pressure testing.
Arkansas Code — all titles (historical 2020) · legal_authorities
20-23-303. Hydrostatic pressure testing.
(a) Boilers and pressure vessels may be tested by hydrostatic pressure one-quarter (¼) greater than the maximum allowable working pressure when in the judgment of the inspector such a test is necessary to ascertain the true condition of the boiler.
(b) All boilers to be tested by hydrostatic pressure shall be filled with water at no less than ambient temperature but in no case less than seventy degrees Fahrenheit (70° F). The metal temperature shall not exceed one hundred twenty degrees Fahrenheit (120° F) during the final examination.
(c) The responsibility for hydrostatic testing shall be that of the owner.
Source: Arkansas Code — historical release 78 (November 6, 2020) · 20-23-303
Stored review status: Historical 2020-11-06 source release; later amendments not reconciled; machine-extracted, not independently legally reviewed; source heading status: text_in_historical_source. A text match is a research starting point; applicability is not established.
Issuing source page ↗
Authority boundary: historical statutory source snapshot not current law.
Open the recorded source website ↗
Record provenance
Stable record: arkansas_code:legal_authorities:20-23-303
Source file: gov.ar.code.title.20.odt
Pages: Not recorded – Not recorded
Passage SHA-256: 0cb0b0673bc968dd2d952b38d7cf218b25f877af1a3209ebccadde211ef14712
Source location: content.xml paragraph 21256
Stored source content
20-23-303. Hydrostatic pressure testing.
(a) Boilers and pressure vessels may be tested by hydrostatic pressure one-quarter (¼) greater than the maximum allowable working pressure when in the judgment of the inspector such a test is necessary to ascertain the true condition of the boiler.
(b) All boilers to be tested by hydrostatic pressure shall be filled with water at no less than ambient temperature but in no case less than seventy degrees Fahrenheit (70° F). The metal temperature shall not exceed one hundred twenty degrees Fahrenheit (120° F) during the final examination.
(c) The responsibility for hydrostatic testing shall be that of the owner.
Cross-references
Connections may be documented source relationships, shared citations or nearby passages. Each explains its basis; a connection alone does not establish applicability to your situation.
No explicit source connection was found. This does not mean there are no relevant authorities.